Back to Subscription, Installation and Licensing Category. Back to Topic Listing Previous Next. Filter by Lables. Message 1 of Old New Am I missing something or has that option been removed, or can the deployment it setups up be modified? Message 2 of Message 3 of Not "out of the box", but it is possible to modify your deployment for all your needs.
In the past the feature "Migrate" was disabled through the "setup deployment". With this "workaround" you can customize all msi packages as you need it. Message 4 of Here is the text from the modified xml file in case I'm missing something Message 5 of Message 6 of Autodesk will not be responsible or liable in any manner whatsoever for the results obtained through use of the Offerings, including any Output.
Your responsibilities include, without limitation, the determination of appropriate uses for the Offerings and the selection of the Offerings and other computer programs and materials to help achieve Your intended results. You are also responsible for establishing the adequacy of independent procedures for testing the reliability, accuracy, completeness, compliance with applicable legal requirements, and other characteristics of any Output, including, without limitation, all items designed with the assistance of the Offerings.
You further acknowledge that the Offerings and Output may not achieve the results You desire within Your design, analysis, simulation, estimation, testing and other constraints. Except as expressly required by Autodesk for example, a credit card number used to purchase a subscription , You will not upload or otherwise make available to Autodesk any Sensitive Personal Information, including any files containing Sensitive Personal Information, in connection with Your use of any Offering.
You will access and use and permit access to and use of Offerings only in conformance with and will comply with all applicable laws. Except as expressly authorized by these Terms, including any Additional Agreement or Special Terms, or as otherwise expressly permitted in writing by Autodesk, You will not:.
The Receiving Party will give the Disclosing Party prior notice of such compelled disclosure to the extent legally permitted and take reasonable steps to limit such disclosure. Autodesk may also disclose Your Confidential Information to comply with any governmental or regulatory body request including subpoenas or court orders , as part of a legal proceeding involving Autodesk, or at Your request.
If disclosure is made at Your request, You may be responsible for the costs of compiling and providing access to Your Confidential Information. You acknowledge and agree that Autodesk and its licensors and suppliers will have all ownership of and all rights with respect to i the Offerings, Documentation, APIs, Metrics and other information or material provided or made available by Autodesk to You and ii any copies of the foregoing, or any materials or other information based on, derived from or otherwise using any of the foregoing including all rights under trade secrets, copyrights, trademarks, patents and all other intellectual property or proprietary rights relating to any of the foregoing.
Also, You agree not to access or attempt to access the Offerings by any means other than the interface Autodesk provides or authorizes. In addition, You agree not to engage in any decompiling, disassembling or other reverse engineering or otherwise attempting to discover, learn or study the structure or organization, underlying algorithms or other internals, the protocols, data structures or other externals, or the source code of the Offerings or APIs, except as expressly permitted under applicable law notwithstanding a contractual prohibition to the contrary.
Autodesk may make available or provide access to other confidential and proprietary information either marked as such or understood to be such under the circumstances. You have only the rights expressly granted to You under these Terms including any Additional Agreement or Special Terms.
All rights not expressly granted are reserved by Autodesk and its licensors and suppliers; Autodesk and its licensors and suppliers expressly disclaim and You agree not to assert any other rights. You agree not to take any action, or to authorize or encourage any third party to take any action or cooperate with any third party in taking any action , inconsistent with the foregoing.
You must bring any warranty claim for any Offering within its applicable Warranty Period. Any statements about the Offerings including any statements about their functionality or performance or Output, or other communications with You, that are not contained in these Terms or any Additional Agreement or Special Terms are for information purposes only and do not constitute a warranty, representation, condition or other commitment.
Without limitation as to the generality of the foregoing, Autodesk does not warrant or otherwise commit that a the Offerings or Output, or the access thereto or use thereof, will be available, uninterrupted, error-free, secure, accurate, reliable or complete, b the Offerings will meet any particular performance or availability criteria, c Your Content will not be lost or damaged or d errors will be corrected or any particular support requests will be resolved to meet Your needs.
Neither Autodesk nor any of its licensors or suppliers will have any liability directly or indirectly for any incidental, special, indirect, consequential or punitive damages; loss of profits or revenue; business interruption or loss of use; cost of procurement of substitute goods or services or other cover; failure of or defects in the Output; loss, corruption or deletion of or failure to delete data or Your Content; or damages resulting from Force Majeure in each case, regardless of the legal theory for seeking such damages or other liability.
In addition, the aggregate liability of Autodesk and its licensors and suppliers with respect to any Offering or Output thereof will in no event exceed the amount paid or payable by You for the Offering in the one-year period before the events or circumstances giving rise to the liability first occurred.
The limitations on liability in these Terms will apply to the maximum extent permitted by applicable law to any damages or other liability, however caused and regardless of the theory of liability, whether based on contract, tort including negligence and strict liability , indemnification, recourse, statute or otherwise, even if Autodesk has been advised of the possibility of the liability and regardless of whether the limited remedies in these Terms fail of their essential purpose.
You acknowledge that the amounts payable for the Offerings are based in part on and reflective of the disclaimers of warranties and limitations on liability in these Terms and that such disclaimers and limitations are an essential element of the bargain between You and Autodesk.
Autodesk does not seek to limit Your warranties, Your other rights and remedies, or the liability of Autodesk for damages or losses to the extent the limits are not permitted by applicable law such as statutory warranties, conditions, remedies or liabilities that cannot be excluded by applicable law.
Nothing in these Terms restricts the effect of warranties, the liability of Autodesk for damages or losses or other terms that cannot be excluded or otherwise modified under applicable law notwithstanding a contractual restriction to the contrary.
These Terms give You specific legal rights, and You may also have other legal rights, which vary from jurisdiction to jurisdiction. For example, some jurisdictions do not allow the exclusion of implied warranties or the exclusion or limitation of incidental or consequential damages or other rights, so those provisions of these Terms may not apply to You.
You may terminate Your subscriptions and these Terms if Autodesk is in material breach of these Terms including any Additional Agreement, any Special Terms or any other applicable terms and fails to cure such breach within 30 days after written notice of the breach. These Terms will automatically terminate without further notice or action by Autodesk if You go into liquidation.
Upon expiration or termination of a subscription or other Offering for any reason, Your rights with respect to that Offering, including any related Software license or subscription Benefits, will end.
At that time, You will stop all access to and use of the Offering including all access and use by Your Authorized Users and uninstall any and all copies of materials related to such Offering including any related Software, Documentation, APIs or other material from Autodesk.
You will retain proof that You returned or destroyed all such copies. This convenience for some Web Services, if available, does not relieve You of responsibility for retaining and securing complete copies of Your Content at all times. Upon any termination of these Terms for any reason, i Your account and Your subscriptions and other Offerings, including those of Your Authorized Users, will immediately terminate, ii You will cease all access to and use of any Offerings including all access and use by Your Authorized Users , and iii the effects described above with respect to expiration or termination of a subscription or other Offering will apply.
Unless Autodesk reasonably determines that immediate action is prudent, Autodesk will seek to notify You of the planned disabling or suspension before it takes effect. Autodesk will endeavor to inform You of major changes to the Offerings. To the maximum extent permitted by applicable law, Autodesk reserves the right from time to time to and You acknowledge that Autodesk may modify these Terms.
Except as otherwise expressly set forth in these Terms including any Additional Agreement or Special Terms , if any such modification has a material adverse effect on You and You do not agree to the modification, You may reject the modification by notifying Autodesk of the rejection within 30 days of the Modification Notice. If You reject a modification under these circumstances, i Your access to and use of any Offerings affected by the modification will continue to be governed by the terms in effect immediately before the modification except to the extent the modification was made for security, privacy or legal compliance reasons until a the end of the then-current period for the subscription or other Offering, if applicable, or b days after the Modification Notice, whichever is earlier; and ii Your rights to such Offerings, including any related subscription Benefits, will then terminate.
In the event of such a termination by You, Autodesk or an applicable reseller will refund the prorated portion of any prepaid fees applicable to the remaining term of Your subscription for the affected Offerings after the effective date of termination. Such date will be the end of the term of such Offerings. If the subscription is renewed or extended, it will be under the then-current Terms. Notices by You or Autodesk will be provided as set forth below, except that You may also provide Your notice of rejection within the day period described above to the email address, or in any other manner, specified in the Modification Notice.
Notwithstanding the forgoing, modifications to the Privacy Statement, Special Terms, Subscription Types, Subscription Benefits or other policies will be handled as described therein. You acknowledge that Your commitments with respect to the Offerings and Subscription Benefits are not contingent on delivery of future features or functionality or oral or written statements about future features or functionality. The English language version of these Terms will be the version used when interpreting or construing these Terms, and any notices or other communications in connection with these Terms will be provided in the English language.
Section and other headings are for ease of reference only and are not to be used to interpret the meaning of any provision. Any rights and remedies provided for in these Terms are cumulative and are in addition to, and not in lieu of, any other rights and remedies available under applicable law.
Depending on where Your principal place of business is or, if You are an individual, where You are resident , these Terms are between You and the Autodesk Party set out below.
The governing law for these Terms, including any rights, obligations and claims of the parties, will be as specified below. Your principal place of business or, if You are an individual, the place of Your residency. If You have any dispute with respect to an Offering or otherwise arising from or relating to these Terms including any Additional Agreement, any Special Terms, the Autodesk Privacy Statement or any other applicable terms , You will first seek to resolve the dispute informally with the Autodesk Party as set forth above by providing notice of the dispute including a description of the dispute and related documentation in the manner described below for Notices and cooperating with the Autodesk Party to try to address the matter amicably.
If the dispute is not resolved within 30 days from receipt of the notice, either You or the Autodesk Party may file a formal claim in the forum for dispute resolution described above depending on Your principal place of business or, if You are an individual, Your place of residence. Notwithstanding the foregoing, Autodesk may apply for injunctive relief and other equitable remedies or their equivalent in any jurisdiction or forum.
Autodesk has the right to verify the installation of, access to, and use of any Offerings by You and Your Authorized Users. Autodesk reserves the right to seek any other remedies available at law or in equity. The affected party will give the other party prompt written notice when possible of the failure to perform and use its reasonable efforts to limit the resulting delay in its performance.
When You obtain, access or use an Offering, You must comply with the export control and international trade laws and regulations of the United States and of any other country whose laws apply to You or Your Content.
You must not access or use any Offering from within a U. You must obtain U. Restricted end uses include, but are not limited to, work on nuclear, chemical or biological weapons or on missile systems capable of delivering them. You must not upload or otherwise provide Autodesk with any content or materials that cannot legally be transferred from Your location to the United States or from the United States to Your location.
You must not use any Offering to make Your Content or any other content or materials available to any country, entity or other party that cannot legally receive them under U.
For U. Government procurement, all Offerings that constitute or include Software are deemed to be commercial computer software as defined in FAR However, if you happen to stumble upon a dialog box we missed, please report it to us in the idea station or via support. Skip to main content. Knowledge Network.
To translate this article, select a language. View Original Translate. English Original X. License Type is determined by Autodesk and may be specified in the applicable License Identification. Licensed Materials also includes Supplemental Materials and User Documentation that Autodesk provides or makes available to Licensee for use with Software licensed under this Agreement if there are no separate terms for such materials specified by Autodesk.
Licensee acknowledges that availability of Upgrades and new versions may be subject to additional fees and the Relationship Program Terms. In addition, Licensed Materials includes, without limitation, any Previous Versions and other Autodesk Materials that Licensee receives or retains pursuant to the Relationship Program Terms, but only for so long as and to the extent expressly authorized by the Relationship Program Terms.
Notwithstanding the foregoing or any other provision of this Agreement , Licensed Materials in all cases excludes Excluded Materials. Such number is determined by Autodesk and may be specified in the applicable License Identification.
Supplemental Materials include, without limitation, a content, such as sample drawings and designs, modules for drawings and designs, and representations of elements used in drawings and designs e. Whether Autodesk Materials are an Upgrade and whether Licensee has met the qualifications to license particular Autodesk Materials as an Upgrade are determined by Autodesk.
Stand-alone Individual License. Stand-alone Individual License is for a perpetual term, except as otherwise provided in this Agreement. Multi-seat Stand-alone License. Multi-seat Stand-alone License is for a perpetual term, except as otherwise provided in this Agreement. Network License. A Network License is for a perpetual term, except as otherwise provided in this Agreement. An Educational Stand-alone Individual License is for a fixed term specified in the applicable License Identification or, if no such term is specified, the term is thirty-six 36 months from Installation or as otherwise authorized in writing by Autodesk.
Educational Multi-seat Stand-alone License. An Educational Multi-seat Stand-alone License is for a fixed term specified in the applicable License Identification or, if no such term is specified, the term is thirty-six 36 months from Installation or as otherwise authorized in writing by Autodesk. Educational Network License. An Educational Network License is for a fixed term specified in the applicable License Identification or, if no such term is specified, the term is thirty-six 36 months from Installation or as otherwise authorized in writing by Autodesk.
Personal Learning License. If no such term is specified, the term is thirteen 13 months from Installation. An Evaluation License is for a fixed term specified in the applicable License Identification, or if no such term is specified, the term is thirty 30 days from Installation or as otherwise authorized in writing by Autodesk.
Such Installation and Access will be in accordance with and subject to the applicable License Type and Permitted Number.
If Autodesk identifies a license in the applicable License Identification as being for a specified period or limited duration, or as having a fixed term, or a rental license but no period, duration or term is specified in the License Identification, the period, duration or term will be ninety 90 days from Installation or the period specified in Sections B.
Session Specific Network License. If the License Identification identifies the License Type as a "Session Specific Network License", Licensee may install one 1 copy of the specific release of the Licensed Materials designated in the applicable License Identification on a Computer and permit Access to such Licensed Materials from multiple Computers through a Supported Virtualization Application, on a Networked Basis, solely by Licensee's Personnel, solely for Licensee's Internal Business needs, only so long as the maximum number of concurrent Sessions does not exceed the Permitted Number or other limits imposed by the Autodesk License Manager tool if any.
With respect to the applicable Supported Virtualization Application, Licensee agrees to activate any available session tracking mechanism, not disable any such session tracking mechanism and to retain all records generated by such session tracking mechanism.
A Session Specific Network License is for a perpetual term, except as otherwise provided in this Agreement. License 1. License Limitations; Prohibitions 2. All Rights Reserved Autodesk and its licensors retain title to and ownership of, and all other rights with respect to, the Autodesk Materials and all copies thereof, including, without limitation, any related copyrights, trademarks, trade secrets, patents, and other intellectual property rights. Privacy; Use of Information; Connectivity 4.
Limited Warranty and Disclaimers 5. Warnings 6. Limitations of Liability 7. Term and Termination 8. General Provisions 9. Additional Terms.
0コメント